HC90 Special Machine For Tool Case
Production Description:
It is the most famous series with the highest popularity.
It is famous for its well-known to many customers over the world for its
excellence, pragmatic, classic. Clamping system adopts two-tie-bar type
clamping device with gears and racks synchrously aligned; Cylinder clamps mold
by direct pressure; It adopts one-piece mold platen with X-shaped pull arms to
increase the bearing rigidity of mold platen; the bevel angle of pull arms is 45°, which
makes a large mold area; The extrusion system adopts frequency control of motor
speed, and the amount of extrusion is large; It adopts PLC programmable
controller made by Panasonic of Japan, of which programs are optimized; All
electric equipments adopt world-famous products.
Machine Features:
It is mainly applied to produce single layer plastic
container, auto parts and other plastic products with a volume under60L. It adopts modular design and has
functions of remote monitoring and diagnosis.
HC90
技术参数(Technical parameter)
●最大制品容积(Max.volume of products)------------------------------------------------------------------60L
●挤出装置(Extrusion)
螺杆直径(Screw
diameter)----------------------------------------------------------------------90mm
螺杆长径比(Screw
length/Dia.ratio)----------------------------------------------------------25：1
塑化能力(Plasticizing
capacity)---------------------------------------------------150 kg/h（HDPE）
机筒加热功率(Heating
power)-------------------------------------------------------------------25kw
绞料电机功率(Driving
power)-------------------------------------------------------------------45 kw
●模头装置(Clamping
system)
最大口模直径(Max
die dia.)--------------------------------------------------------------------350mm
模头加热功率(Die
head heating power)-------------------------------------------------------20KW
储料缸容积(Accumulation
volume)--------------------------------------------------6L(8LOptional)
●合模装置(Clamping
system)
模板最大平面尺寸(宽×高)(Platen
dimensions(W×H)-------------------------------900x800mm
合模力(Clamping
force)-------------------------------------------------------------------------270KN
模板开距(Platen
opening stroke Max.)-------------------------------------------------400-1050mm
最大开合模速度(Max.
clamping speed)(空循环Idle
cycle)-----------------------------600PC/H
模具尺寸(Mold
dimension)（宽×高
WxH）----------------------------------------700X1000mm
模具厚度(Mold
thickness)----------------------------------------------------------------405－600mm
●液压系统(Hydraulic
system)
小泵small
pump-----------------------------------------------------------------------------------16
MPa
大泵big
pump--------------------------------------------------------------------------------------12
MPa
●泵油系统Hydraulic
pump system
油泵电机功率Motor
power of oil pump---------------------------------------------------------30KW
壁厚电机功率Motor
power of parison thickness------------------------------------------------4KW
●电源(Electrical
power)
电压(Power
voltage)----------------------------------------------------------------------------AC380V
频率(Frequency)--------------------------------------------------------------------------------------50Hz
线制(Connecting
cable)-------------------------------三相四线制(Three phase
four wire system)
●总额定功率(Total rated power)
--------------------------------------------------------------------------124kw